Elevated Dual-Entrance Outdoor Pet House XDB-495A

An Elevated Outdoor House with Two Access Points

XDB-495A is a raised PP pet house built around a horizontal shelter body, two side entrances and switchable side windows. The layout gives B2B buyers a visibly different proposition from conventional front-entry kennel forms.

The catalogue identifies water- and mildew-resistant construction with UV protection, and shows grey, blue and brown colour directions. The verified product size is 968 × 668 × 682 mm with a <10 kg pet indicator.

Key Features: A Distinctive Layout for Differentiated Outdoor Ranges

• Two entrances provide an alternate access route within the visible design.
• Raised legs separate the main house body from the ground.
• Switchable side windows allow the opening condition to be changed.
• Three catalogue colour directions support channel-specific assortment planning.

Product Details: Review Legs, Windows, Roof and Entry Alignment

Approval should cover the four support legs, body-panel engagement, roof seating, both entry openings and the switching action of each side window. The assembled house should sit evenly without rocking, while all edges and moulded surfaces should match the approved sample.

Specifications: Verified XDB-495A Product and Carton Data

Applications: Position the Model by Footprint and Access Logic

The 968 mm overall length and elevated structure make XDB-495A suitable for programmes that need a broad, low outdoor-house profile. Buyers should evaluate the two-entry layout, side-window operation and installed footprint against the intended pet-size segment and display environment.

Procurement Selection: Use Colour and Window Configuration to Define SKUs

A focused programme can keep one structural specification while separating grey, blue and brown colour directions by channel. The purchase order should also define the expected side-window state, hardware count and carton identification so warehouse teams can distinguish variants without opening cartons.

OEM & Private Label: Private-Label Inputs for XDB-495A

• Colour and quantity split
• Destination and sales channel
• Brand and carton artwork
• Assembly and warning documentation
• Sample and inspection requirements

Quality Control: Quality-Control Focus for a Raised Dual-Entry House

• Check all four legs for level contact and secure engagement.
• Confirm both entry openings match the approved shape.
• Operate each side window and inspect its seating position.
• Inspect roof and body-panel joints after full assembly.
• Verify colour, parts count and carton mark before closure.

Packaging: Protect Long Panels and Keep Hardware Counted

The long body components and projecting window parts require separation inside the carton. Hardware should be bagged and counted, and the assembly sheet should clearly identify each panel and leg. Carton trials should check both component protection and straightforward receiving.

Compliance and Documentation Scope

For XDB-495A, destination-market requirements should be written into the approved specification before production. The document pack should identify the selected PP product configuration, assembly or use instructions, warnings, label artwork and carton marks. Any required market test, certificate or powered-accessory document must be listed as a separate RFQ item rather than assumed.

Supplier Advantages for This Product Programme

• The model matrix for XDB-495A keeps the selected size or configuration traceable from quotation through receiving.
• Verified PP construction and catalogue dimensions give buyers a defined basis for sample approval.
• Product-specific inspection points connect the visible structure to the approved sample, purchase order and carton mark.
• A consolidated artwork, accessory and packing brief reduces avoidable variation before mass-production approval.

Information Needed for an Accurate Quotation

1. XDB-495A order quantity
2. Grey/blue/brown allocation
3. Destination market
4. Artwork and documentation brief
5. Sample and QC scope

Buyer FAQ

What are the verified dimensions?

The product measures 968 × 668 × 682 mm and the carton measures 520 × 140 × 815 mm.

Which material is specified?

The catalogue specifies PP.

What differentiates the structure?

The model combines an elevated body, two side entrances and switchable side windows.

Plan an XDB-495A Colour and Channel Programme

Share the colour split, destination, artwork and inspection brief for a model-specific quotation.